This is the most common question I hear from Bay Area homeowners before installing an EV charger. Many contractors will immediately tell you that you need a panel upgrade โ€” which adds $1,500โ€“$4,000 to your bill. Here's the honest answer.

โœ… Short answer: Most homeowners do NOT need a panel upgrade. Even with a 100-amp panel, you can safely charge your EV with the right approach.

How to Know If You Need an Upgrade

The first step is a load calculation โ€” we add up all the electrical loads in your home (HVAC, water heater, dryer, stove, etc.) and compare it to your panel's capacity. If there's enough headroom, we install the EV charger without any panel work.

You probably DON'T need a panel upgrade if:

You might need a panel upgrade if:

What Is Load Management?

A load management system (like the Emporia Vue or Wallbox Power Boost) monitors your home's total electrical usage in real time. When other appliances are running heavily, it automatically reduces EV charging speed to prevent overloading your panel. When the house is quiet, it charges at full speed.

๐Ÿ’ก Real example: A San Jose customer with a 100-amp panel, electric dryer, and AC unit. We installed a load management device for $200 โ€” no panel upgrade needed. Total install cost: $900 instead of $3,500+.

When a Panel Upgrade Makes Sense

Sometimes a panel upgrade IS the right call โ€” not just for the EV charger, but for your home's future. If you're planning to add solar, a Tesla Powerwall, or are moving to an all-electric home, upgrading to a 200-amp solar-ready panel now makes long-term sense.

At Hertz Electric, we'll always give you both options and be upfront about the tradeoffs.

What About 100-Amp Panels Specifically?

We've successfully installed Level 2 EV chargers on dozens of 100-amp panels in San Jose without upgrades. The key is doing a proper load calculation first. If your home uses gas for heating and cooking, you almost certainly have enough capacity.

Get a Free Assessment

The fastest way to know for sure is to send us a photo of your electrical panel. We'll do a quick load assessment and tell you exactly what's needed โ€” no pressure, no upsell.

Free Panel Assessment

Send a photo of your panel and we'll tell you what you need โ€” usually within a few hours.

๐Ÿ“ž Call (415) 676-0598